Ro-Neet Herbicide

Product safety

Protections

Early entry

The special early entry workers must use motorized ground equipment that is equipped with an enclosed cab that meets the definition in the Worker Protection Standard for Agricultural Pesticides [40 CFR 170.240(d)(5) for dermal protection. In addition, these workers must: Wear the personal protective equipment required in the PPE section of this labeling for applicators, Either wear the type of respirator specified in the PPE section of this labeling or use an enclosed cab with a properly functioning ventilation system that is used and maintained according to the manufacturer’s written operating instructions and that is declared in writing by the manufacturer or by a government agency to provide at least as much respiratory protection as the type of respirator specified in the PPE section of this labeling. Be provided and have immediately available for use in an emergency when they must exit the cab in the treated area: chemical-resistant gloves, and, if using an enclosed cab that provides respiratory protection, a respirator of the type specified in the PPE section of this labeling, Take off any PPE that was worn in the treated area before reentering the cab, and Store all such PPE in a chemical-resistant container, such as a plastic bag, to prevent contamination of the inside of the cab. (2) Employers of the special early entry workers must make sure that these workers: Have received training equivalent to WPS pesticide handler training before entering the treated area, Are provided with the specified type of respirator, and the respirator fits them correctly and is maintained as required in the WPS for handlers, Are provided all of the WPS protections for early entry workers, including PPE instructions, labeling information and instructions, decontamination sites, and duties related to providing, cleaning, and maintaining the PPE for early-entry workers.

Personal Protection

All mixers, loaders, applicators and other handlers must wear: Long-sleeved shirt and long pants Shoes plus socks Chemical-resistant gloves made of barrier laminate, nitrile rubber, neoprene rubber, or viton, and Chemical-resistant apron when mixing and loading. Handlers performing tasks, such as spill clean-up or cleaning equipment, for which engineering controls are not feasible must wear: Long-sleeved shirt and long pants, Shoes plus socks, Chemical-resistant gloves made of barrier laminate, nitrile rubber, neoprene rubber, or viton, Chemical-resistant apron, and One of the following respirator devices: a NIOSH-approved respirator with an organic vapor (OV) cartridge with a combination R or P filter, with NIOSH approval number prefix TC-84A, or a NIOSH-approved gas mask with a canister with NIOSH approval number prefix TC-14G, or a NIOSH-approved powered air purifying respirator with an organic vapor (OV) cartridge and combination HE filter with NIOSH approval number prefix TC-23C.

Restricted Entry Interval

48 hours